manualshive.com logo in svg

Olympus HSMT-Compact, User Manual

The Olympus HSMT-Compact is a top-of-the-line camera designed for high-resolution photography. Capture stunning images and explore its range of advanced features with ease by accessing the comprehensive User Manual, available for free download from our website. Maximize the potential of your camera and unleash your creativity today!

Share
Download
background image

DMTA017-01EN, Rev. F, August 2016

Labels and Symbols

 

1

Labels and Symbols

Product information and safety-related labels (with symbols) are attached to the 
HSMT-Compact scanner at the locations shown in Figure i-1 on page 1 and Figure i-2 
on page 2. Label details are provided in Table 1 on page 2. If any or all of the labels or 
symbols are missing or illegible, please contact Olympus.

Figure i

‑

1  Identification label location

Model number

Serial number

Summary of Contents for HSMT-Compact































































Reviews:

No comments

Related manuals for HSMT-Compact

Xerox XCARD-SCAN Voluntary Product Accessibility Template preview
XCARD-SCAN
Brand: Xerox Pages: 12
Xerox DocuMate 515 Product Safety Data Sheet preview
DocuMate 515
Brand: Xerox Pages: 2
Xerox DocuMate 515 Specifications preview
DocuMate 515
Brand: Xerox Pages: 2
Xerox DocuMate 250 Hardware Replacement Manual preview
DocuMate 250
Brand: Xerox Pages: 2
LZR FLATSCAN SL User Manual preview
FLATSCAN SL
Brand: LZR Pages: 12
ClearClick Virtuoso 2.0 Quick Start Manual & User Manual preview
Virtuoso 2.0
Brand: ClearClick Pages: 20
i.safe MOBILE IS-TH1MR.M1 Quick Start Manual Safety Instructions preview
IS-TH1MR.M1
Brand: i.safe MOBILE Pages: 76
I.R.I.S. IRISPEN EXECUTIVE 6-MAC Manual preview
IRISPEN EXECUTIVE 6-MAC
Brand: I.R.I.S. Pages: 58
Renkforce 2300623 Quick Manual preview
2300623
Brand: Renkforce Pages: 4
Epson ES-1200C Pro PC User Manual preview
ES-1200C Pro PC
Brand: Epson Pages: 96
Epson B81306 series Service Manual preview
B81306 series
Brand: Epson Pages: 35
Epson B813071 Instruction Manual preview
B813071
Brand: Epson Pages: 12
Epson CaptureOne Product Information Manual preview
CaptureOne
Brand: Epson Pages: 7
Epson B11B189011 Product Information Manual preview
B11B189011
Brand: Epson Pages: 11
Epson B12B819011 Quick Start Manual preview
B12B819011
Brand: Epson Pages: 2
Epson B81302 User Manual preview
B81302
Brand: Epson Pages: 8
Epson 2450 - Perfection Photo Scanner Specifications preview
2450 - Perfection Photo Scanner
Brand: Epson Pages: 2
Epson CaptureOne 30DPM Specifications preview
CaptureOne 30DPM
Brand: Epson Pages: 2

Brands by name

Popular brands

Load more brands