19
EN
Frequency
Frequency
This product uses the 2.4 GHz band for wireless communications. However,
other wireless devices may use the same frequency.
Setup
ON/OFF lamp/button
BEEP lamp/button
X-RCV lamp/button
Channel dial
Group dial
1
Turn on the
fl
ash.
• Refer to the
fl
ash manual for details.
2
Press the ON/OFF button to turn on the wireless receiver.
• The ON/OFF lamp will light up.
3
Hold down the X-RCV button to select an operating mode.
• The X-RCV lamp is off: RCV mode (You set the
fl
ash control mode and
fl
ash intensity on the wireless commander. This
wireless receiver receives the setting information
and
fi
ring signal from the wireless commander.
Then, the
fl
ash that is connected to this wireless
receiver
fi
res a
fl
ash.)
• The X-RCV lamp is on: X-RCV mode (You set the
fl
ash control mode and
fl
ash intensity on the
fl
ash that is connected to this
wireless receiver. This wireless receiver receives a
fi
ring signal from the wireless commander. Then, the
fl
ash that is connected to this wireless receiver
fi
res
a
fl
ash with this wireless receiver’s settings.)
4
Turn the group dial to select a communication group.
5
Set the
fl
ash control mode and
fl
ash intensity.
• RCV mode:
Set the
fl
ash control mode and
fl
ash intensity on the
wireless commander.
• X-RCV mode:
Set the
fl
ash control mode and
fl
ash intensity on the
fl
ash that is connected to this wireless receiver.
6
Turn the channel dial to select a communication channel.
• Select the same channel that you set on the wireless commander.
