![background image](http://html1.mh-extra.com/html/olympus/ferrari-digital-model-2004/ferrari-digital-model-2004_reference-manual_4283978017.webp)
17
Safety precautions
LCD monitor
●
Do not push the monitor forcibly; otherwise the image may become vague, resulting in a
playback mode failure or damage to the monitor. If the monitor is damaged, be careful not to get
any of the liquid crystals from the monitor in your month. If liquid crystals get on your limbs or
clothes, cleanse it away.
●
A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.
●
When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the
monitor. This is not a malfunction; It will be less noticeable in playback mode.
●
In places subject to low temperatures, the LCD monitor may take a long time to turn on or its
color may change temporarily. When using the camera in extremely cold places, it is a good idea
to occasionally place it in a warm place. A LCD monitor exhibiting poor performance due to low
temperatures will recover in normal temperatures.
●
The LCD monitor is made with high-precision technology. However, black spots or bright
spots of light may appear constantly on the LCD monitor. Due to its characteristics or the
angle at which you are viewing the monitor, the spot may not be uniform in color and
brightness. This is not a malfunction.
FCC Notice
●
Radio and Television Interference
Change or modifications not expressly approved by the manufacturer may void the user’s authority
to operate this equipment. This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Adjust or relocate the receiving antenna.
– Increase the distance between the camera and receiver.
– Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
– Consult your dealer or an experienced radio/TV technician for help.
Only the OLYMPUS-supplied USB or IEEE1394 cables should be used to connect the camera to
USB or IEEE1394-enabled personal computers (PC).
Any unauthorized changes or modifications to this equipment would void the user's authority to
operate.