Olympus FE-47, Instruction Manual

Page: 51 / 59

51 EN
The following AA (R6) batteries cannot
be used.
Batteries whose bodies are only partially or not
at all covered by an insulating sheet.
Batteries whose
-
terminals are raised, but not
covered by an insulating sheet.
Batteries whose - terminals are fl at and not
completely covered by an insulating sheet.
(Such batteries cannot be used even if the
-
terminals are partially covered.)
If NiMH batteries are not charged within the
speci
fi ed time, stop charging them and do not
use them.
Do not use a battery if it is cracked or broken.
If a battery leaks, becomes discolored, deformed
or becomes abnormal in any other way during
operation, stop using the camera.
If a battery leaks
fl uid onto your clothing or skin,
remove the clothing and fl ush the affected area
with clean, running cold water immediately. If
the
fl uid burns your skin, seek medical attention
immediately.
Never subject batteries to strong shocks or
continuous vibration.
•
•
•
•
•
Caution for Usage Environment
To protect the high-precision technology contained
in this product, never leave the camera in the
places listed below, no matter if in use or storage:
Places where temperatures and/or humidity
are high or go through extreme changes.
Direct sunlight, beaches, locked cars, or near
other heat sources (stove, radiator, etc.) or
humidi
fi ers.
In sandy or dusty environments.
Near
fl ammable items or explosives.
In wet places, such as bathrooms or in the rain.
When using products with weatherproof designs,
read their manuals as well.
In places prone to strong vibrations.
Never drop the camera or subject it to severe
shocks or vibrations.
When mounted on a tripod, adjust the position of
the camera with the tripod head. Do not twist the
camera.
Do not touch electric contacts on cameras.
Do not leave the camera pointed directly at the
sun. This may cause lens or shutter curtain
damage, color failure, ghosting on the CCD, or
may possibly cause
fi res.
Do not push or pull severely on the lens.
Before storing the camera for a long period,
remove the batteries. Select a cool, dry location
for storage to prevent condensation or mold from
forming inside the camera. After storage, test the
camera by turning it on and pressing the shutter
button to make sure that it is operating normally.
Always observe the operating environment
restrictions described in the camera’s manual.
•
•
•
•
•
•
•
•
•
•
•
•
•