Olympus FC-WR, Instructions Manual

Page: 25 / 140

25
EN
Shooting with Automatic Flash Control
(TTL Mode)
The TTL mode adjusts the fl ash level according to the brightness through the
camera lens. You can use this mode with cameras that support the Olympus TTL
mode. Refer to the Olympus website for a list of compatible cameras.
1
Press the MODE button. Then, turn the dial to
select TTL. Press the OK button to confi rm.
MODE
A
B
C
FP CH
0.0 1
RATIO
0.0
1/128
TTL
TTL
M
Off
2
Set the fl ash compensation (+/-).
Press the
a
button to hig/- RATIO. Then, turn the dial to adjust the
setting.
• You can set a fl ash compensation from -5 to +5.
Press the OK button.
Manually Setting the Flash Intensity
(M Mode)
The fl ash will fi re at the selected intensity. You can use this mode with cameras
that do not support the Olympus communication feature.
1
Press the MODE button. Then, turn the dial to
select M. Press the OK button to confi rm.
MODE
A
B
C
FP CH
0.0
1
RATIO
0.0
1/100
TTL
TTL
M
Off
2
Set the fl ash intensity (RATIO).
Press the
a
button to highlight RATIO. Then, turn
the dial to adjust the setting.
• You can set a fl ash ratio from 1/1 to 1/128.* 1
*1 You can select 1/2 EV or 1/3 EV for the adjustment
increment. (P. 28)
*2 On the scale display,
t
is the current selection.
u
is the
previous setting.
Press the OK button.
MODE
A
B
C
ZOOM LED
0.0
RATIO
0.0
1/100
TTL
TTL
M
1/32
1/64
1/128
Scale display*
2