background image

28

EN

Con

fi

 gurable functions

Con

fi

 gurable functions

 indicates the default setting.

 EV step: You can change the adjustment increment for 

#

+/- (

fl

 ash 

compensation/

fl

 ash intensity).

1/3

 / 

1/2

Back light mode: You can set the back light of the control panel.

Auto

 (The back light turns on during operation.) / 

On

 (The back light is always on.) / 

Off

 (The back light is always off.)

Back light timer: You can set when to turn off the back light of the control 
panel.

You can select the time (in seconds) until the back light turns off automatically 
when there is no operation.

From 

1sec 

to 

5sec

 to 

15sec

Safety Precautions

Read WARNINGS and CAUTIONS thoroughly to ensure safe usage. These 
safety precautions protect the users and others and prevent property damage.

 WARNING

Failure to observe the precautions indicated by this symbol 
may result in injury or death.

•  Do not use 

fl

 ash in places where it may be exposed to 

fl

 ammable or explosive 

gas. Otherwise, 

fi

 re ignition or explosion may result.

•  Do not directly solder the product or modify, remodel, or disassemble.
•  Do not cover the light emitting area of the 

fl

 ash with your hand, and do not 

touch the light emitting area after continuous 

fi

 ring. It may burn your skin.

•  Water and foreign matter inside of the device may cause 

fi

 re or electric shock. 

If the device is immersed in or exposed to water or foreign matter is found 
inside of the device, turn off the power immediately and remove batteries with 
care. Contact your dealer or consult an Olympus Authorized Service Station.

•  To prevent a traf

fi

 c accident, do not direct the 

fl

 ash at a person operating a 

motor vehicle.

•  Do not use the 

fl

 ash or AF illuminator in close proximity to others (especially 

infants). Keep the 

fl

 ash out of reach of children. Light from the 

fl

 ash can cause 

visual impairment.

•  To prevent a short circuit, do not use batteries with a damaged external seal 

(insulation coating).

Summary of Contents for FC-WR IM012



















Reviews: