background image

165

Informatio

n

11

Battery and charger

z

Use the single Olympus lithium-ion battery (BLM-1).
Other batteries cannot be used.

z

The camera's power consumption varies widely with usage and other 
conditions.

z

As the following consume a lot of power even without shooting, the battery 
will be drained quickly.

Performing zoom repeatedly.

Pressing the shutter button halfway in shooting mode, performing auto 
focus repeatedly.

Displaying images on the LCD monitor for a prolonged period.

When connected to a computer or printer.

z

When using a drained battery, the camera may turn off without the low 
battery warning being displayed.

z

The battery will not be fully charged at the time of purchase. Charge the 
battery using the designated charger (BCM-2) before use.

z

The normal charging time of the provided charger is approximately 5 hours 
(estimated).

z

Do not use other chargers than the one designated.

z

The charger should be used within the voltage range of AC 100–240 V (50/
60 Hz). If used overseas, a transformer may be necessary. Check with an 
electrician or travel agent for details.

z

Do not use commercially available travel adaptors as the charger may 
malfunction.

s0003_e_advanced.book  Page 165  Wednesday, December 28, 2005  2:33 PM

Summary of Contents for EVOLT E-330





































































































































































































Reviews: