QUICK-REFERENCE GUIDE – ELASTOGRAPHY (ELST) MODE
Select the image whose
strain ratio you want to
measure.
Set ROI A and the
average strain value
within the ROI shown.
Set ROI B (in comparison
with A). Then the average
strain value is shown and
the strain ratio (B/A) is
automatically calculated.
Press the
STRAIN
RATIO
button after
freezing the image.
Strain Ratio Measurement
1
3
4
2
Notes
* If ROIs A and B are set outside the ROI of the elasticity image, the
measurement cannot be made. Set the ROIs A and B within the elasticity
image.
* Strain ratio measurement is available for FREEZE images only. It is not
available with saved images.
E
0
4
28
75
0 · 1
1/
15 · P
R
Specifications, design, and accessories are subject to change without any notice or obligation on the part of the manufacturer.
Postbox 10 49 08, 20034 Hamburg, Germany
Wendenstrasse 14–18, 20097 Hamburg, Germany
Phone: +49 40 23773-0, Fax: +49 40 233765
www.olympus-europa.com
Disclaimer: Any content or information (“Content”) presented herein is illustrative in nature and
does not guarantee or represent specific information, outcomes, or results. Olympus Corporation,
its subsidiaries, affiliates, directors, officers, employees, agents, and representatives (collectively
“Olympus”) does not represent to or warrant the accuracy or applicability of the Content. Under no
circumstances shall Olympus be liable for any costs, expenses, losses, claims, liabilities, or other
damages (whether direct, indirect, special, incidental, consequential, or otherwise) that may arise
from, or be incurred in connection with, the Content or any use thereof.