![Olympus EPOCH 6LT User Interface Manual Download Page 36](http://html2.mh-extra.com/html/olympus/epoch-6lt/epoch-6lt_user-interface-manual_3934183036.webp)
DMTA-10084-01EN, Rev. 2, November 2018
Chapter 4
26
The default behavior for the sidebar menu or sidebar submenu is that the first button
is highlighted, but not selected, when you open the menu or submenu for the first
time. If that button is an adjustable value button it must selected before it can be
adjusted.
To select the first adjustable value button in a menu or submenu
Press Enter (
) to select the highlighted button (see “Using the Sidebar
Menu and Submenus” on page 26 for details on adjusting the value).
4.1.3
Using the Sidebar Menu and Submenus
There are differences between the way you move through the sidebar menu and the
way you move through a sidebar submenu.
4.1.3.1
Using the Sidebar Menu
When using the Sidebar menu, you can move the focus from button to button by
turning the adjustment knob.
To use the sidebar menu buttons
1.
Turn the adjustment knob to move through the sidebar menu buttons.
Buttons are highlighted as you turn the knob.
2.
Highlight the button of your choice.
3.
Press Enter (
) to execute an action.
— If the button has an adjustable parameter value, turn the adjustment knob to
change the value, and then press Enter (
) to confirm the new value.
The Shift (
), Enter (
) key sequence switches the adjustment knob
between coarse and fine adjustment of the highlighted value. A line under the value
indicates a coarse adjustment.
— If the button performs an immediate action, that action is executed.
TIP
Summary of Contents for EPOCH 6LT
