Olympus EPOCH 650, User Manual

Page: 69 / 362

DMTA-10055-01EN, Rev. A, February 2015
Software Overview 57
The following receiver parameters are available for live adjustments in the Rcvr
menu:
• Filter : Receiver filter setting
• Rect : Waveform rectification ( Full full wave, Half+ half wave positive, Half– half
wave negative, RF no rectification)
• Reject : Percent reject (from 0 % to 80 %)
The 30 filters available on the EPOCH 650 allow broadband or narrowband settings to
match the requirements of a given application. Each filter is a fully digital filter set.
Table 5 on page 57 lists the low-pass and high-pass cutoffs for each available filter.
Table 5 Filter cutoffs
0.2 MHz − 10 MHz 2.0 MHz − 21.5 MHz
8.0 MHz − 26.5 MHz 0.5 MHz − 4.0 MHz
0.2 MHz − 1.2 MHz 1.5 MHz − 8.5 MHz
5.0 MHz − 15 MHz DC − 10 MHz
DC − 1.2 MHz DC − 4.0 MHz
DC − 8.5 MHz DC − 15.0 MHz
DC − 26.5 MHz 0.2 MHz − 4.0 MHz
0.2 MHz − 8.5 MHz 0.2 MHz − 15.0 MHz
0.2 MHz − 26.5 MHz 0.5 MHz − 10.0 MHz
0.5 MHz − 8.5 MHz 0.5 MHz − 26.5 MHz
0.5 MHz − 15.0 MHz 1.0 MHz − 3.5 MHz
1.5 MHz − 10.0 MHz 1.5 MHz − 15.0 MHz
1.5 MHz − 26.5 MHz 2.5 MHz − 7.0 MHz
5.0 MHz − 10.0 MHz 5.0 MHz − 26.5 MHz
6.0 MHz − 12.0 MHz 8.0 MHz − 15.0 MHz