DMTA-10055-01EN, Rev. A, February 2015
Chapter 3
52
Figure 3-5 P3 key selecting the Range parameter
3.3
Convention for Identifying Menu Items and Parameters
The following convention is used to concisely refer to an element in the menu
structure:
Menu > Parameter = value
where:
Menu
represents the name of the menu item (example:
Meas Setup
)
Parameter
represents the name of the parameter (example:
Unit
)
Value
represents the desired editable or selectable parameter value (example:
mm
)
For example, to instruct you to set the
Unit
parameter to
mm
, in the
Meas Setup
menu, the expression:
Meas Setup > Unit = mm
is used.
Choose
Meas Setup > Unit = mm
If the value cannot be edited, the expression does not include a value:
Choose
Gate1 >Zoom
3.4
Parameter Adjustment
When a parameter such as gain or range is selected, you can modify it using the arrow
keys or adjustment knob (depending on your hardware configuration).
Summary of Contents for EPOCH 650
