Olympus EPOCH 600, Basic Operation Manual

Page: 47 / 64

DMTA ‐ 10007 ‐ 01EN [U8778365], Rev. B, June 2010
Basic Operation 41
7. Use the knob or arrow keys to adjust the displayed value to the appropriate
thickness. For this example, the transducer is coupled to a 5 mm step.
8. Press Continue to accept the adjusted value, and then move on to the second
calibration step.
9. Couple the transducer to the thick step of material.
10. Position gate 1 around the resulting indication on screen.
11. Bring the indication to 80 % full screen height using the (AUTO XX%) function
(see Figure 2 ‐ 15 on page 41).
12. Press [ESCAPE] to return to the Auto Cal menu.
Figure 2 ‐ 15 The gate 1 start
13. Press Cal ‐ Vel .
14. Use the knob or arrow keys to adjust the displayed value to the appropriate
thickness. For this example, the transducer is coupled to a 12.5 mm step (see
Figure 2 ‐ 16 on page 42).