![background image](http://html2.mh-extra.com/html/olympus/e-pm1/e-pm1_instruction-manual_4252401093.webp)
93
EN
Customizing camera settings
10
Wireless remote control
fl
ash photography
External
fl
ash units that offer a remote control mode and are designated for use
with this camera can be used for wireless
fl
ash photography. The camera can
independently control up to 3 groups consisting of the supplied
fl
ash unit and/or remote
fl
ash units. See the documentation provided with the external
fl
ash units for details.
1
Set the remote
fl
ash units to RC mode and place them as desired.
Turn the external
fl
ash units on, press the MODE button, and select RC mode.
Select a channel and group for each external
fl
ash unit.
2
Select [On] for [
#
RC Mode] in
X
Shooting menu 2 (P. 107).
The super control panel switches to RC mode.
You can choose a super control panel display by repeatedly pressing the
INFO
button.
Select a
fl
ash mode (note that red-eye reduction is not available in RC mode).
3
Adjust the settings for each group in the super control panel.
Flash intensity
value
250
250 F5.6 0.0
0.0
P
38
38
A Mode
TTL
M
Off
+5.0
TTL
+3.0
1/8
–
LO
1
Ch
Group
Select the
fl
ash control
mode and adjust the
fl
ash
intensity separately for
each group. For MANUAL,
select the
fl
ash intensity.
•
Normal
fl
ash/Super FP
fl
ash
Switch between normal
fl
ash and Super FP
fl
ash.
•
Communication light level
Set the communication
light level to [HI], [MID],
or [LO].
•
Channel
Set the communication
channel to the same
channel used on the
fl
ash.
•
Flash
intensity
Flash control
mode
Adjust settings for the
supplied
fl
ash unit.
4
Attach the supplied
fl
ash unit and raise the
fl
ash head.
After con
fi
rming that the built-in and remote
fl
ash units have charged, take a test
shot.
Wireless
fl
ash control range
Position the wireless
fl
ash units with their
remote sensors facing the camera. The
illustration on the right shows the approximate
ranges at which the
fl
ash units can be
positioned. The actual control range varies with
local conditions.
7m
5m
100°
100°
50°
50°
50°
50°
60°
60°
30°
30°
30°
30°
#
Cautions
We recommend using a single group of up to three remote
fl
ash units.
Remote
fl
ash units can not be used for second curtain slow synchronization or anti-shock
exposures longer than 4 seconds.
If the subject is too close to the camera, the control
fl
ashes emitted by the supplied
fl
ash
may affect exposure (this effect can be reduced by reducing the output of the supplied
fl
ash by, for example, using a diffuser).
•
•
•
•
•
•
•
•
•