n
3-9 Image Stabilization, Color, and Quality
3-9
Image Stabilization, Color,
and Quality
The features described in this section reduce blur and noise compensate for the
color of the light source. This section also covers picture mode options that can be
used to control exactly how your pictures turn out.
Reducing Camera Blur
(
n
Image Stabilizer)
Reduce blur caused by the camera shake that commonly occurs, for example,
when the subject is poorly lit or in photos taken at high zoom ratios. You will need to
provide the lens focal length when using image stabilization with lenses that are not
part of the Four Thirds or Micro Four Thirds family.
• This setting can be accessed via:
- The LV super control panel (P. 377)
- The menus (P. 377)
- Live controls (P. 377)
M-IS OFF
(off)
Image stabilization disabled.
M-IS
1
(omni-directional)
Electronic image stabilization combined with VCM-controlled
image sensor movement.
M-IS
2
(omni-directional)
VCM-controlled image sensor movement only.
• Image stabilization may be unable to compensate for excessive camera motion. Use a tripod
in these cases.
• You may notice noise or vibration while image stabilization is in effect.
• The setting selected with the lens image stabilization switch, if any, takes priority over that
selected with the camera.
376 EN
3
Summary of Contents for E-M1X
