![background image](http://html1.mh-extra.com/html/olympus/e-m10-pancake-kit-silver/e-m10-pancake-kit-silver_instruction-manual_4239672043.webp)
43
EN
Basic operations
5
4
Press the shutter button to start shooting.
• A composite image is built up from images shot with the reference exposure time.
After each exposure the camera displays the new composite image.
• During composite shooting the screen brightness changes automatically.
5
Press the shutter button again to end shooting.
• The maximum length of composite shooting is 3 hours. However, the available
shooting time will vary depending on shooting conditions, and charging state of the
camera.
#
Cautions
• In live bulb, live time and live composite photography, there are limits on the available ISO
sensitivity settings.
• To reduce camera blur when shooting using bulb, time, or composite photography, mount
the camera on a sturdy tripod and use a remote cable (P. 128).
• During bulb, time and live composite photography, there are limits on the settings of the
following functions.
Sequential shooting/self-timer shooting/time lapse shooting/AE bracket shooting/image
stabilizer/
fl
ash bracketing/multiple exposure* etc.
* When an option other than [Off] is selected for [Live BULB] or [Live TIME] (P. 93).
• Even when you have set [Noise Reduct.], noise and/or light spots may still be noticeable
in the image displayed on the monitor and shot images under certain environmental
conditions (temperature etc.) and camera settings.
Noise in images
While shooting at slow shutter speeds, noise may appear on screen. These phenomena
occur when the temperature rises in the image pickup device or image pickup device
internal drive circuit, causing current to be generated in those sections of the image pickup
device that are not normally exposed to light. This can also occur when shooting with a
high ISO setting in a high-temperature environment. To reduce this noise, the camera
activates the noise reduction function.
g
[Noise Reduct.] (P. 92)
Using movie mode (
n
)
Movie mode (
n
) can be used to
fi
lm movies with special effects.
You can create movies that take advantage of the effects available in still photography
mode. Use live control to select the settings.
g
“Adding effects to a movie” (P. 66)
You can also apply an after-image effect or zoom in on an area of the image during
movie recording.
Adding effects to a movie [Movie Effect]
1
Rotate the mode dial to
n
.
2
Press the
R
button to begin recording.
• Press the
R
button again to end recording.
3
Touch the on-screen icon of the effect you wish to
use.
Summary of Contents for E M10 Pancake Kit Silver
Page 160: ......
Page 161: ...WC265101 ...