![background image](http://html1.mh-extra.com/html/olympus/e-m10-mark-iv/e-m10-mark-iv_instruction-manual_4285174143.webp)
Connecting the camera to a smartphone
5
143
EN
Pairing the Camera and Smartphone
Follow the steps below when connecting the devices for the first time.
•
Adjust pairing settings using OI.Share, not the settings app that is part of the smartphone
operating system.
1
Launch the copy of the dedicated OI.Share app previously installed on your
smartphone.
2
Select [Device Connection] in the
q
Playback Menu and press
I
.
•
You can also connect by tapping
G
in the monitor.
3
Follow the on-screen guide to adjust Wi-Fi/
Bluetooth
settings.
•
The
Bluetooth
local name and passcode, the Wi-Fi SSID and password, and a QR
code are displayed in the monitor.
Connection Setup
Scan the QR code, using
the Olympus Image Share
app.
Disconnect
Bluetooth Name
Bluetooth Passcode
Wi-Fi SSID
Wi-Fi Password
: xxxxxxxxxxx
: 000000
: xxx-x-x-xxxxxxxx
: 00000000
3/3
QR code
Wi-Fi SSID
Wi-Fi Password
Bluetooth
local name
Bluetooth
Passcode
4
Tap the camera icon at the bottom of the OI.Share display.
•
An [Easy Setup] tab will be displayed.
5
Follow the on-screen instructions in OI.Share to scan the QR code and adjust
connection settings.
•
If you are unable to scan the QR code, follow the on-screen instructions in OI.Share
to adjust settings manually.
-
Bluetooth
: To connect, select the local name and enter the passcode displayed in
the camera monitor into the
Bluetooth
settings dialog in OI.Share.
- Wi-Fi:
To connect, enter the SSID and password displayed on the camera
monitor into the Wi-Fi settings dialog in OI.Share.
•
w
1
will be displayed when pairing is complete.
•
The
Bluetooth
®
icon indicates the status as follows:
0
: The camera is emitting wireless signal.
1
: Wireless connection has been established.
6
To end the Wi-Fi connection, press
MENU
on the camera or tap [Disconnect]
on the monitor screen.
•
You can also turn the camera off and end the connection from OI.Share.
•
At default settings,
Bluetooth
®
connection is kept active even after Wi-Fi connection
is terminated, allowing you to shoot remotely with a smartphone. To set the camera
to also terminate
Bluetooth
®
connection when terminating Wi-Fi connection, set
[Bluetooth] to [Off].
Summary of Contents for E-M10 Mark IV
Page 185: ......
Page 186: ...WD720000 date of issue 2020 6...