43
EN
2
Ex
pos
u
re
2
Exposure
The camera sets the optimum aperture value and shutter speed automatically according to
the subject brightness.
Set the mode dial to
P
.
• When the shutter button is half-pressed, the shutter speed
and aperture value are displayed on the viewfinder. Releasing
the shutter button displays the shutter speed and aperture
value on the super control panel screen.
Program shift (
%
)
By turning the control dial in the
P
mode, you can change
the combination of aperture and shutter speed while
maintaining the optimum exposure.
g
“Program line diagram (P mode)” (P. 129)
• The program shift setting will not be cancelled after
shooting. To cancel program shift setting, turn the control
dial until the shooting mode indication
%
on the viewfinder or super control panel changes
to
P
or turn off the power.
• Program shift is not available when you are using a flash.
The shutter speed and aperture value are blinking:
j
The optimum exposure cannot be obtained. For details, see “Exposure warning display” (
g
P. 130).
Program shooting
TIPS
Super control panel
Aperture value
Shutter speed
Viewfinder
Shooting mode
AF confirmation mark
250
F5.6
2009. 09.01
AF
arge
Normal
OFF
Viewfinder
Program shift
s0030_e_00_0_unified.book 43 ページ ２００９年７月３日 金曜日 午後４時１１分
