DP74
23
3-2 Installing the low-profile bracket
a
If the PCIe slot of the desktop PC is the low profile specifications, it is
required to replace the existing bracket with the low-profile bracket.
·
To avoid damage caused by static electricity, touch an
unpainted metallic surface of the PC with your hand to
discharge the static electricity before replacing the bracket.
·
When replacing the bracket, do not touch the parts on the
board surface or push it with excessive force to prevent
the damage.
Prepare the Phillips screwdriver and remove the screw a (2 positions)
from the PCIe interface board.
Replace the existing bracket b attached to the PCIe interface board
with the low-profile bracket c , and screw in the screw a (2 positions).
NOTE
1
2
a
2
c
b
