![background image](http://html1.mh-extra.com/html/olympus/dp30bw/dp30bw_instructions-manual_4238611010.webp)
7
HARDWARE INSTALLATION
# Be sure to read the instruction manual for the PC in order not to
damage the PC and PCI interface board.
# Be sure to turn off the PC and peripherals and unplug their power
cords before installing the PCI interface board.
# To avoid damage due to static electricity, touch an unpainted metallic
surface of the PC with your hand to leak the static electricity from your
body before installation.
1. Open the cover of the PC’s main body.
2. Remove the clamping screw of the slot covers @ of an unused PCI slot
on the Motherboard and remove the two covers.
3. Insert the PCI interface board ² taking care not to touch the board
surface directly by hand.
4. Plug the ATX power supply cable connector ³ of the PCI interface board
² into an unused HDD power supply connector which is directly drawn
from the power supply inside the PC. If the PC in use does not have an
unused power supply connector, use the ATX power supply cable of the
PCI interface board ² as the branching cable.
5. Insert the Trigger IO board | into the slot to the right of the PCI interface
board ².
6. Connect boards ² and | with the connection cable ƒ.
After confirming that the board is inserted and connected securely,
attach the slot cover using the clamping screw removed above.
7. Attach the PC cover to the original position.
8. Connect the interface cable to the connector on the PCI interface board
and tighten the connector lock screws. Check that the interface cable
does not slip out.
1
Installing the Boards
(Figs. 1 & 2)
Fig. 1
Fig. 2
@
²
³
|
ƒ
²
|
ƒ