background image

```

a

 Current date

b

  Recording mode indicator

c

  Microphone sensitivity indicator

d

  Total number of recorded fi les 

for the date

e

 Current fi le number

f

  Elapsed recording time

g

  Remaining recording time

a
b
c
d
e

f

g

```

Getting started

1

 

Inserting batteries

2

 

Turning on the power

Slide the 

POWER

 switch to the [

ON

] position.

Turning off the power:

While the recorder is in stop mode, slide the 

POWER

 switch to the 

[

OFF/HOLD

] position.

Power save mode:

If the recorder is on and stops for 10 minutes or longer, the display 
shuts off and it goes into power save mode. To exit power save mode, 
press any button.

HOLD:

If you slide the 

POWER

 switch to the [

OFF/HOLD

] position, the 

current conditions will be preserved, and all buttons and switches 
will be disabled.

Strap hole

  •  Strap is not supplied.

Battery indicator:

When [ 

 ] appears on the display, replace the batteries as soon as possible. 

When the batteries are too weak, [ 

 ] and [

Battery Low

] appears on the 

display and the recorder shuts down.

First, set the time and date.   

“Setting time and date” (Verso)

“Changing the recording mode” (Verso)

Recording indicator light is lit while recording.

Pause

Microphone sensitivity

Turn the microphone in 
the direction of the source 
to be recorded.

High

Low

This is a highly sensitive mode which can record 
surrounding noises. (

A

H

)

This is the standard 
level of microphone 
sensitivity. (

A

L

)

  •  To ensure successful recordings, we recommend that you test the record function and 

volume before use.

 

•  To ensure recording from the beginning, start recording after you see the recording 

indicator light on.

 

•  Recorder will not be able to record anymore when [

Memory Full

] or [

Maximum File 

Size is reached

] appears. Delete any unnecessary fi les before recording any further.

 

•  If the recorder is placed directly on a table when recording a conference, etc., the 

vibrations of the table are likely to be recorded. To obtain a clear recording, place a 
notebook or handkerchief between the recorder and the table to prevent the vibrations 
from being recorded.

 

•  When remaining recording time is less than 60 seconds, the recording indicator light 

starts fl ashing. When the recording time is decreasing to 30 or 10 seconds, the light 
fl ashes faster.

Recording

Recording

Recording

Recording

  •  When you use this recorder for the fi rst time after purchasing, or when you switch it on after removing the batteries for more than 

30 minutes when exchanging batteries etc, the time will return to the default setting and the [

Set Time & Date

] will appear.

 

•  If the time and date are not set, the fi le is saved using default time and date.

High

Low

Playback

Playback

You can 

also change 

the recording 

mode!

If the recorder is in recording mode and the 

REC

 (

x

button is pressed, recording pauses. If the 

REC

 (

x

button is pressed again, recording resumes.

  •  The recorder will time out after 60 minutes 

when left in [

PAUSE]

.

Set the recording mode to match the surrounding conditions.

Summary of Contents for DP-10







Reviews: