DMTA-20006-01EN, Rev. B, February 2014
Setup and Operation
39
Figure 2-22 Example of tail configured to the 2.0 position
b)
Retighten the tail-adjustment screw.
9.
Configure the probe holder (see Figure 2-23 on page 39):
a)
Loosen the probe-holder position screw.
b)
Slide the probe holder to position noted in step 5.
, and then retighten the
probe-holder position screw.
Figure 2-23 The probe holder shown in the extended position
Tail-adjustment screw
1.
0
1.
5
2.
0
2.5
3.
0
3.5
4.
0
Probe-holder position screw
Extended position
Retracted position
Summary of Contents for COBRA
