Olympus CK30, Instructions Manual

Page: 11 / 39

CK30/CK40
6
6 Mounting the Stage Plate (CK40 Only)
(Fig. 9)
Fit the standard stage plate @ into the opening on the stage.
# Turn the standard stage plate so that the notch ² faces to the
front for easy confirmation of an objective tip. When using the
glass stage plate, set it in the direction so that its product code
inscription “ CK40-CPG ” can be read from the front.
7 Mounting the Observation Tube (CK40 Only)
(Fig. 10 & 11)
Mounting the CH3-BI45/CH3-TR45
1. Loosen the observation tube clamping knob @. (Fig. 10)
2. Insert the circular dovetail at the bottom of the observation tube into the
mount opening on the microscope body. Adjust the observation tube
until the binocular eyepieces face directly to the front, and then tighten
the clamping thumbscrew. (Fig. 10)
Mounting the CK40-TBI
1. Loosen the observation tube clamping knob @ as much as possible
without it coming off. (Fig. 11)
2. Carefully insert the relay lens tube ³ of the CK40-TBI ² into the observa-
tion tube mount opening. (Fig. 11)
3. Insert the circular dovetail at the bottom of the CK40-TBI ² into the mount
opening on the microscope body. Adjust the observation tube until the
binocular eyepieces face directly to the front, and then tighten the clamp-
ing knob. (Fig. 11)
# Do not mount the observation tube on the microscope body at an
extremely oblique angle. If you do, the observation tube’s dovetail
could hit the relay lens tube and damage it.
# Use in combination the CK40-TBI ² and relay lens tube ³ from the
same package.
Fig. 9
Fig. 10
Fig. 11
@
²
@
@
²
³