DMTA048-01EN, Rev. C, February 2013
28 Chapter 2
Figure 2-6 Connecting the remote control to a pump
4.
Align the pins of the power supply LEMO connector with the holes of the
remote
control’s
DC
IN
receptacle (Figure 2-6 on page 28).
5.
Insert the power supply LEMO connector into the remote control’s
DC
IN
receptacle.
6.
Insert the power cable in the power supply unit (see Figure 2-5 on page 27 and
Figure 2-6 on page 28) and the power plug in an AC power outlet (wall).
To disconnect the power supply and the remote control from the CFU-PWZ
1.
Ensure that the pump is turned off.
2.
On the pump, hold the metallic portion of the remote control’s power connector
(Figure 2-6 on page 28).
3.
Pull out the remote control connector from the pump’s power receptacle.
4.
On the remote control, hold the box and the metallic portion of the power
supply’s connector (Figure 2-6 on page 28).
5.
Pull out the power supply connector from the remote control’s
DC
IN
receptacle.
6.
Disconnect the power plug from the AC power outlet (wall).
CFU-PWZ:
DC
IN
receptacle
Power supply LEMO
connector
AC In connection,
power cable
Power supply unit
Power plug
CFU-PWZ unit shown
Start/Stop button,
Remote control
Remote
control
:
DC
IN
receptacle
Remote control
LEMO
connector
Downloaded from
Summary of Contents for CFU-PWZ
