![background image](http://html2.mh-extra.com/html/olympus/camedia-c-730-ultra-zoom/camedia-c-730-ultra-zoom_reference-manual_4183243204.webp)
203
Chapter 11
Troubleshooting (Cont.)
POSSIBLE CAUSES
CORRECTIVE ACTION
REF. PAGE
Pictures you have already taken do not appear on the monitor.
1
The camera is in the
shooting mode.
2
There is no picture on
the card.
3
There is a problem with
the card.
4
The camera is
connected to a TV.
5
The monitor is not on.
1
Set the mode dial to
.
2
NO PICTURE appears on the
monitor. Record pictures.
3
See the error code chart.
4
The monitor does not
function when the camera is
connected to a TV.
5
Press
to turn on the
monitor.
P. 127
P. 36, 37
P. 208
P. 152
P. 38
1
The brightness is not
adjusted properly.
2
The monitor is exposed
to direct sunlight.
1
Adjust the brightness.
2
Block the sunlight or move
out of the sunlight.
P. 168
–
The monitor is not clear.
1
The diopter is not
adjusted properly.
2
The brightness is not
adjusted properly.
1
Adjust the diopter again.
2
Adjust the brightness.
P. 35
P. 168
The viewfinder display is not clear.
Picture rotate, Picture protect, Single-frame erase, All-frame erase,
Print reserve and Card formatting cannot be performed.
1
A write-protect adhesive
seal is affixed to the
card (SmartMedia).
1
Use the card after peeling
off the seal. Do not reuse
the write protect seal.
P. 24