![background image](http://html1.mh-extra.com/html/olympus/camedia-c-55-zoom/camedia-c-55-zoom_advanced-manual_4179166080.webp)
Panorama shooting
80
5
Mo
re
u
sef
ul
f
unc
ti
o
n
s
2
Make sure that the edges of the pictures overlap, then take
the pictures.
• The focus, exposure and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture.
• You cannot adjust the zoom after the first picture.
• Panorama shooting is possible for up to 10 pictures.
• When you have taken 10 pictures, a
warning mark appears.
3
Press
N
to exit panorama shooting.
The part of the previous picture where it will be joined to the next picture does not
remain in the frame on the edge of the screen. You have to remember what the
part in the frame looked like and take the next picture so it overlaps. Compose your
shots so that the right edge of the previous picture overlaps with the left edge of
the next picture if you are connecting pictures from left to right (or vice versa if you
are connecting pictures from right to left).
Note
• The panorama mode is only available with Olympus cards.
• During panorama shooting, the flash and sequential shooting modes are not
available.
• If the mode dial is turned during panorama shooting, the camera cancels the
panorama mode and changes to the mode selected in the mode dial.
• The camera itself cannot connect panorama pictures. The OLYMPUS Master
software is necessary to connect the pictures.
d4250_e_00_0_bookfile.book Page 80 Friday, December 24, 2004 11:45 AM