![background image](http://html2.mh-extra.com/html/olympus/camedia-c-5050-zoom/camedia-c-5050-zoom_reference-manual_4068759020.webp)
19
How to use this manual
• This sample page is only for your reference. It may differ from the actual page in
this manual.
5
Flash
Flash intensity control
You can adjust the amount of light emitted by the flash.
In some situations, you may get better results by adjusting the light emission.
Examples include small subjects, distant backgrounds, or situations when
increased contrast is desired. You can adjust the brightness in the range of
±2.0 in 1/3 EV steps.
1
Adjust the brightness by turning
the jog dial while holding down
and
at the same time.
• The exposure value is displayed on the
control panel while the flash intensity
control function is set.
Mode dial
Exposure compensation
button
Flash mode
button
Jog dial
Turning to the left
decreases light emission in
steps of 1/3 EV.
Turning to the right
increases light emission in
steps of 1/3 EV.
(EV : Expo
Turning to the left
decreases light emission in
steps of 1/3 EV.
Set the mode dial to any of the marks shown here.
The buttons for the
function and their
location are clearly
illustrated.
This shows jog dial operations.
Sharpness
This function adjusts the sharpness of the image.
1
In the top menu, select MODE
MENU
→
→
→
→
PICTURE
→
→
→
→
SHARPNESS, and press
.
“How to use the menus” (P.xx)
2
Press
to adjust the
sharpness b5 and -5.
• To increase the sharpness (+) :
Press
. The image contours are
emphasized, making the image appear
d. Use this setting
Mode dial
Arrow pad
OK button
CARD
SEt
CAM
PICtURE
SHARPNESS
CONtRASt
SAtURAtION
Follow the arrows to perform menu operations. For details on operating
procedures, see “How to use the menus” (P.70).
This represents the arrow pad. Only arrows
applicable to the operation are shown.