Olympus CAMEDIA C-460 Zoom Quick Start Manual Download Page 93

Page: 93 / 276

Taking still pictures

Shoo

ting

asic

Taking still pictures using the viewfinder

The camera actually records a wider area than the picture you compose while
looking through the viewfinder.

Open the lens barrier fully.

• Slide the lens barrier fully open until

it clicks.

• The lens extends and the monitor

turns on.

"Turning off the monitor" (P.49)

Decide the composition while
looking at the image in the
viewfinder.

Take the picture by following the same procedure as for
shooting using the monitor.

"Taking still pictures using the monitor" (P.44)

AF target mark

Orange lamp

Green lamp

Summary of Contents for CAMEDIA C-460 Zoom





















































































































































































































































































Search results

Summary of Contents for CAMEDIA C-460 Zoom

Reviews:

Olympus CAMEDIA C-460 Zoom, Quick Start Manual, Page: 93 / 276

Search results

Summary of Contents for CAMEDIA C-460 Zoom

Reviews: