Olympus CAMEDIA C-310 Zoom Reference Manual Download Page 84

Page: 84 / 175

ack

Erasing pictures

This function enables you to erase recorded pictures. You can choose the
single-frame erase or the all-frame erase.

• You cannot erase pictures that are protected. Cancel the protection

before erasing such pictures.

• Once erased, pictures cannot be restored. Be careful not to accidentally

erase pictures you want to keep.

"Protecting pictures" (P.82)

Single-frame erase

This function erases only the picture displayed on the monitor. The all-frame
erase function can be used to erase all the pictures on the card at once.

"All-frame erase" (P.84)

Set the power switch at

• The monitor turns on and displays the last

picture taken. (Single-frame playback)

Use the arrow pad to display the
picture you want to erase.

"Viewing still pictures" (P.73)

Press .

• The top menu is displayed.

Press

to select

ERASE.

Press

to select YES, and

press .

• The picture is erased and the menu is

closed.

Note

Power switch

Arrow pad

OK button

Summary of Contents for CAMEDIA C-310 Zoom
















































































































































































Search results

Summary of Contents for CAMEDIA C-310 Zoom

Reviews:

Olympus CAMEDIA C-310 Zoom, Reference Manual, Page: 84 / 175

Search results

Summary of Contents for CAMEDIA C-310 Zoom

Reviews: