![background image](http://html1.mh-extra.com/html/olympus/camedia-c-3000-zoom/camedia-c-3000-zoom_basic-manual_4158434010.webp)
Checking the batteries
When the power is turned on in the Record mode, the remaining battery
power will be displayed on the control panel.
lights and turns off automatically.
Batteries are OK. You can shoot.
blinks and other indicators on the control panel are displayed
normally.
Battery power is low and batteries should be replaced. If NiMH batteries are
used, the battery low warning will blink faster than when lithium battery packs
are used.
blinks and other indicators on the control panel go out.
Batteries are dead and should be replaced immediately.
Note:
• When the camera is being operated on batteries that are running low, the
camera may emit several short beeps and blink the number of storable
pictures on the control panel after you take a shot or when you turn on the
power. If this happens, the picture you have just taken will not turn out
properly. Replace the batteries and take the picture again.
Checking the number of storable pictures
When the power is turned on in the Still Picture Record mode, the number of
storable pictures will appear on the control panel. (For movie pictures, the
seconds remaining will appear.)
10
Number or
storable pictures
Seconds
remaining
The Green lamp blinks and CARD FULL appears on the LCD monitor when
the number reaches 0.
No more photographs can be taken. Replace the
SmartMedia, erase unwanted pictures, or transfer the data
to a personal computer and free up space in the
SmartMedia.
CARD FULL