manualshive.com logo in svg

Olympus CAMEDIA C-2020 Zoom, Instructions Manual

Share
Download
Olympus CAMEDIA C-2020 Zoom Instructions Manual Download Page 57

57

USING THE FLASH

Select the flash mode according to the shooting conditions.

You can select the following flash modes with each press of the Flash
mode button.

HQ

Flash mode

Use

Auto-Flash (p. 58)

Automatically fires in low-light 
and backlight conditions.

Red-Eye Reducing Flash (p. 58) Significantly reduces the

phenomenon of “red-eye” 
(subject’s eyes appearing red). 

Fill-In Flash (p. 59)

Fires regardless of available 
light.

Flash Off (p. 59)

Never fires.

➟

➟

➟

➟

Flash working range:

Wide-angle

Telephoto

Approx. 31" ~ 18.4 ft

Approx. 8" ~ 12.5 ft

Note:
• The flash is being charged while the Orange lamp is blinking. Wait until

the Orange lamp goes off to take the picture.

• When using the flash in the Macro mode, especially with Wide-angle

shooting, the flash may not have the proper effect. Confirm the result
using the LCD monitor.

• See page 75 for using an extension flash.
• The main flash cannot be used in the Sequence mode.

Summary of Contents for CAMEDIA C-2020 Zoom






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands