![background image](http://html1.mh-extra.com/html/olympus/camedia-c-1000l/camedia-c-1000l_instructions-manual_733955154.webp)
154
E
When the camera is connected to a computer, an error
message appears while data is being transferred to the
computer.
1
The cable is not plugged in correctly.
[
Connect the cable correctly. (P. 140)
2
The power is OFF.
[
Press the power button to turn it ON. (P. 96)
3
The batteries are exhausted.
[
Replace the batteries with new ones (P. 40) or use the
optional AC adaptor (P. 44).
4
The serial port is not selected correctly.
[
Use the operating system software to see if the serial
port is selected correctly. (P. 140)
5
There is no available serial port.
[
Make one available by following the PC’s instructions.
[
(Macintosh only) Turn off AppleTalk/LocalTalk.
6
The image transfer speed is not selected correctly.
[
Select the right speed on the computer.
7
TWAIN/Plug-In is not installed.
[
Install TWAIN/Plug-In on your computer.
* When no operations can be performed by pressing any
buttons, push the Reset button in the Card
compartment cover, then press the Power button. (P.
48)
Summary of Contents for CAMEDIA C-1000L
Page 170: ...MEMO...
Page 171: ...MEMO...