30
Setting the date and time
1
Ge
tt
in
g
st
ar
te
d
6
Press
ac
to select one of the
following date formats: Y-M-D (Year/
Month/Day), M-D-Y (Month/Day/
Year), D-M-Y (Day/Month/Year).
Then press
d
.
• Move to the year setting.
• The following steps show the procedure
used when the date and time settings are
set to Y-M-D.
7
Press
ac
to set the year, then
press
d
to move to the month
setting.
• To move back to the previous setting,
press
b
.
• The first two digits of the year are fixed.
8
Repeat this procedure until the date
and time are completely set.
• The time is displayed in the 24-hour format.
Consequently, 2 p.m. is displayed as 14:00.
9
Press
e
.
• For a more accurate setting, press
e
when the time signal hits 00 seconds.
10
To turn the camera off, set the
power switch to OFF.
• The date and time settings will be canceled if the camera is left
without a battery for approximately 6 days. The settings will be
canceled more quickly if the battery was only loaded in the camera
for a short time before being removed. Check that the correct date
and time have been set before shooting.
Y M D
SELECt
GO
SEt
SELECt
GO
SEt
Power switch
e
button
Note
