Adjusting the color tone (White balance)
45
Advanc
ed s
hoot
ing
5
Press
to select one of the
white balance modes: AUTO,
,
,
or .
The white balance is set.
To close the menu, press
twice.
6
Take the picture.
• The white balance setting returns to AUTO (factory default setting)
when the lens barrier is closed. “Saving the settings (All Reset)” (
p.78)
• If you want a color tone that resembles what you see under tungsten
lighting, set the white balance mode to
.
• White balance may not be effective under some special light sources.
• After setting a white balance mode other than AUTO, play back the
picture and check the colors on the monitor.
• When the flash is fired with a white balance setting other than AUTO,
colors may appear different in the resulting picture from the colors
you see on the monitor.
CARD
SEt
CAM
PICtURE
WB
AUtO
