background image

START

OLYMPUS OPTICAL CO., LTD.

San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan.

(Customer support) Tel. 0426-42-7499 Tokyo

http://www.olympus.co.jp

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000

(Technical support) Tel. 1-888-553-4448 distec @ Olympus

http://www.olympus.com

OLYMPUS OPTICAL CO. (EUROPA) GMBH.

(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany. Tel. 040-237730

(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.

http://www.olympus-europa.com

Viewing Pictures

1.

Make sure the lens barrier is closed.

If the lens barrier is open,
slide it to close.

2.

Press and hold the 

 monitor button for a moment.

The last picture you took appears on the monitor.

Lens barrier

Monitor button

3.

To view other images, press the   or   arrow pad key.

When you want to cancel viewing, press the 

 monitor

button again.

E
N
D

Shooting a Close Subject 

(at 10 cm ~ 0.5 m/0.4 in ~ 1.6 ft)

Using the Macro Mode

1.

Open the lens barrier.

Slide the lens barrier until it clicks to turn on the camera.

2.

Press the 

 OK/menu button.

The monitor shows the shooting mode menu.

OK/menu button

Pre

ss

Press

1 / 3

AUTO

OFF

OFF

OFF

END

OK

SELECT

Arrow pad

3.

Select   by pressing the 

 or 

 arrow pad key.

1 / 3

AUTO

OFF

OFF

OFF

END

OK

SELECT

4.

Select “ON” by pressing the   or   arrow pad key.

5.

When you have made your selection, press the 

 OK/menu

button to enter the Macro mode.

When you want to
cancel shooting,
close the lens
barrier.

Note: The macro mode is

automatically
canceled when the
camera is turned off.

 Using the Flash

1.

Open the lens barrier.

Slide the lens barrier until it clicks to turn on the camera.

2.

Press the 

 OK/menu button.

The monitor shows the shooting mode menu.

OK/menu button

Pre

ss

Arrow pad

Monitor

1 / 3

AUTO

OFF

OFF

OFF

END

OK

SELECT

Displayed menu

3.

Select   by pressing the 

 or 

 arrow pad key.

The default setting is Auto-Flash.

4.

Each time you press the   or   arrow pad key, the flash mode changes:

Auto-Flash 

 

 Red-Eye Reduction Flash 

 

 Fill-In Flash 

 

 Night

Scene 

 

 Flash Off. Select one of these modes.

1 / 3

AUTO

OFF

1 / 3

AUTO

OFF

OFF

OFF

END

OK

SELECT

Display
changes as
key is pressed

Note: For the function and effect of each flash mode, refer to Page

56 of the camera’s Instructions.

5.

When you have made your selection, press the 

 OK/menu button.

The desired flash mode is set

V T 2 5910 2

Using this camera for the first time

QUICK START
GUIDE

Monitor

Arrow pad

 01/Quick start guide.En

01.3.15, 6:54 PM

1

Reviews: