Olympus 8080 - CAMEDIA C Wide Zoom Digital Camera Reference Manual Download Page 23

Page: 23 / 263

Inserting a card

Get

ting s

tar

Make sure the camera is turned off.

• The monitor is off.
• The viewfinder is off.
• The lens is retracted.

Open the card cover.

Insert a card.

xD-Picture Card

• Insert the card into the front slot, ensuring that it

is not inserted diagonally.

• Insert the card as far as it will go until it clicks.
• If the card is inserted incorrectly oriented or it is

inserted at an angle, the contact area may be
damaged or the card may become jammed.

• If the card is not inserted fully, it may not be able

to record data.

CompactFlash/Microdrive

• Hold the card straight and insert it correctly into

the rear slot, as shown.

• Set the eject button in the down position.

Close the card cover securely until it
clicks.

Removing the card

xD-Picture Card

• Push the card all the way in to unlock it, then let

it return slowly.
The card will be ejected. Take hold of the card
and pull it out.

Card
cover

Notch

Eject button

Releasing your finger quickly after pushing the
card all the way in may cause it to eject forcefully
out of the slot.

Note

Summary of Contents for 8080 - CAMEDIA C Wide Zoom Digital Camera








































































































































































































































































Search results

Summary of Contents for 8080 - CAMEDIA C Wide Zoom Digital Camera

Reviews:

Related manuals for 8080 - CAMEDIA C Wide Zoom Digital Camera

Brands by name

Popular brands

Olympus 8080 - CAMEDIA C Wide Zoom Digital Camera, Reference Manual

Search results

Summary of Contents for 8080 - CAMEDIA C Wide Zoom Digital Camera

Reviews:

Related manuals for 8080 - CAMEDIA C Wide Zoom Digital Camera

Brands by name

Popular brands