DMTA-10022-01EN, Rev. C, January 2015
Chapter 3
42
2.
Use the
[
]
and
[
]
keys to select the character you want to enter. Hold down the
key to quickly cycle through the letters, numbers, and special characters.
3.
Use the
[
]
keys to move to the next character.
4.
Repeat step 2 and step 3 to enter other characters.
5.
If you need to move the position of the cursor in the value text box, use the
[
]
or
[
]
key.
6.
To insert a character at the cursor position, press
[CAL ZERO]
.
The character at the cursor, and all those to the right, move one position to the
right, making space for one new character.
7.
To delete the character at the cursor position, press
[CAL VEL]
.
The character at the cursor is deleted, and any characters to the right move to the
left by one position.
8.
Press
[ENTER]
to accept the character string and move to the next parameter.
Summary of Contents for 45MG
