Olympus 38DL PLUS, User Manual

Page: 293 / 318

DMTA-10004-01EN, Rev. D, November 2016
Technical Specifications 281
ECHO
WINDOW Echo detect gate which begins at
end of MB (main bang) blank in
mode 1 or interface echo in
modes 2 and 3. The value reported
for the end of echo window is
relative to the main bang. 0 ns to 224.71 µs. 55 ns or MB blank
time interval, whichever is less.
ECHO 1
DETECT Detection polarity of first echo + or −
ECHO 2
DETECT Detection polarity of second echo + or −
IF BLANK Blank after interface echo 0 µs to 20 µs
M3 BLANK Blank after first measured back-
wall echo in mode 3 0 µs to 20 µs
VELOCITY Ultrasonic sound velocity of
material to be measured 0.508 mm/µs to 18.699 mm/µs
(0.0200 in./µs to 0.7362 in./µs)
ZERO Zero calibration factor 0.00 to 999.99
Table 40 General specifications
Element Description
Keypad Sealed and embossed membrane surface
Tactile and audible feedback, color-coded graphics, 21 keys
Dual element
transducers Automatically identifies the transducer type and optimizes the gage for
that transducer.
Non-Olympus transducers might work, but performance is not
guaranteed.
Following transducers are supported: D790, D790-SM, D791, D791-RM,
D792, D793, D794, D795, D797, D798, D7906-SM, D7908, D799, D7912,
D7913, and MTD705
Single element
transducers Can be used with contact, delay line, and immersion transducers from
2 MHz to 30 MHz.
High precision software option expands the frequency range to
0.5 MHz to 30.0 MHz
Table 39 Setup parameter description (continued)
Name Description Units/Resolutions/Range