DMTA-10009-01EN [U8778346], Rev. D, November 2016
Initial Setup
51
To set the clock
1.
Press
[2nd F]
,
[SETUP MENU] (SP MENU)
.
2.
In the menu, select
CLOCK
.
3.
In the
CLOCK
screen (see Figure 4-2 on page 51):
a)
Set parameters to the current date and time and to the desired date and hour
modes.
b)
Select
SET
.
Figure 4
‑
2 Selecting clock parameters
4.4
Changing Display Settings
You can change the appearance of some display elements such as colors, brightness,
waveform rectification, and waveform trace.
To change the display setting
1.
From the measurement screen, press
[DISPLAY]
.
2.
In the
DISPLAY SETTINGS
screen (see Figure 4-3 on page 52), select the desired
parameter and value for the following parameters:
—
COLOR SCHEME
to either select the
INDOOR
or
OUTDOOR
optimized
visibility (see “Color Schemes” on page 52 for details).
Summary of Contents for 38DL PLUS
