background image

126

EN

12

Information

12

Information

Usable cards

“Card” in this manual refers to a recording medium. This camera can use CompactFlash, 
Microdrive or xD-Picture Card (optional).

Precautions when using a Microdrive

A Microdrive is a medium that uses a compact hard disk drive. Because the disk drive 
rotates, a Microdrive is not as resistant to vibration or impact as other cards. Special care is 
needed when using a Microdrive (especially during recording and playback) to make sure the 
camera is not subjected to shock or vibrations. Be sure to read the following precautions 
before using a Microdrive.
Also, refer to the manuals provided with your Microdrive.
• Be very careful when putting the camera down during recording. Place it gently on a firm surface.
• Do not use the camera in places subject to vibrations or excessive shock, such as at a 

construction site or in a car while driving along a bumpy road.

• Do not take a Microdrive close to areas where it may be exposed to strong magnetism.
• The Microdrive may not function correctly under low air pressure conditions, like in altitudes 

of 3,000 m (9,843 ft.) and higher.

x

Notes

• The data in the card will not be erased completely even after formatting the card or deleting 

the data. When discarding, destroy the card to prevent leakage of personal information.

Formatting the card

Non-Olympus cards or cards formatted on a computer must be formatted with the camera 
before they can be used.
All data stored on the card, including protected images, is erased when the card is formatted. 
When formatting a used card, confirm there are no images that you still want to keep on the card.

1

MENU

[

W

]

[CARD SETUP]

2

Use 

fg

 to select [FORMAT], then press the 

i

 

button.

3

Use 

fg

 to select [YES], then press the 

i

 button.

• Formatting is performed.

When inserting cards into the two card slots:

j

Select the card to be used in 

[

r

/

p

]

g

r

/

p

” (P. 106)

Card basics

CompactFlash

A CompactFlash is a large-
capacity solid state flash 
memory card. You can use 
commercially available cards.

Microdrive

A Microdrive is a medium that 
uses a large-capacity compact 
hard disk drive. You can use a 
Microdrive that supports 
CF+Type II (CompactFlash 
extension standard).

xD-Picture Card

An xD-Picture Card is a 
recording medium used mainly 
in compact cameras.

 TIPS

ALL ERASE

FORMAT

CARD SETUP

BACK

SET

s0023_e_00_0_unified.book  Page 126  Monday, February 2, 2009  5:18 PM

Summary of Contents for 262162





























































































































































Reviews: