Olympic HD3, Manual

Page: 13 / 13

Olympic Drives & Equipment Sales Ltd.
13
Maintenance Schedule
Daily Operations:
1. Check Z-Drive oil level (Header Tank).
2. Monitor lubrication oil pressure gauge.
Every Month or 200 Hours:
1. Inspect power steering motor for wear or leakage.
2. Inspect all hydraulic lines and fittings; tighten or replace as required.
Every Six Months or 1000 Hours: (whichever comes first)
3. Monthly inspection plus below;
4. Drain and replace lube oil and filter (if applicable). Maintain oil level 3 inches (7.6 cm)
from the top of the tank.
5. Inspect zinc anodes and replace as required.
Every 5 years or 6000 Hours: (whichever comes first)
1. Overhaul the Z-Drive replacing all bearings and seals.
2. Inspect all components for wear and replace as required.
3. Flush lube and steering oil systems.
The oil changes are dependent on the type of oil used, so check with the oil for recommendation.