26
27
28
Restoring the Default Factory Settings
19
Restoring the Default Factory Settings
Note:
If you restore the factory (default) settings, all the data saved is lost! You must use the
phone lock password (
+
Page 18) to restore the default settings.
Proceed as follows to restore the factory settings:
1. When in Standby mode, press:
(left)
/
Settings
(left)
/
Restorefactorysettings
(left)
2. Enter the phone lock password and press
(left) to confirm it.
3. Press
(left) again to answer the prompt.
The phone restarts and the factory settings are restored.
SOS (Emergency Call) Function
The SOS key activates the emergency call function. Press and hold the SOS key for approx. 3 sec. to
trigger an emergency call. An acoustic alarm signal is sounded and the emergency text is sent to the
phone numbers stored for the purpose. After that, the respective phone numbers stored are dialled in
succession in Handsfree mode. You can assign up to 5 phone numbers to the SOS key.
Proceed as follows to assign phone numbers to the SOS key
:
/
Settings
(left)
Select the menu.
/
EmergencySettings
(left)
Select the menu option.
/
NumberList
(left)
Select the menu option.
or
(left)
Enter the phone number and continue or confirm
.
Female/Male contact
Use these menu options to store a number you can later call by pressing & holding the
key
(female contact) or
key (male contact) in Standby mode.
To assign numbers to these keys, open
FemaleNumber
/
MaleNumber
and proceed as follows:
(left)
Enter the phone number to be stored and confirm it.
Set the phone to Standby mode, press the corresponding key for approx. 2 sec. and a connection is
established to the number stored.
User Profiles
Use the
Userprofiles
menu to change the ring tone settings.
To open the
Userprofiles
menu, press:
(left)
/
Userprofiles
(left)
Press the
/
keys to select a profile and press
(left) to open the following options:
Activate
Activate the profile selected.
Customize
Adapt the selected profile to your personal needs
(
+
Adapting user profiles, Page 20).
Reset
Reset the profile selected to the default factory settings.