Olympia Smile, Operating Instructions Manual, Page: 22 / 28

Settings
OPERATING
INSTRUCTIONS
18 Page
www.olympia-business.de
Changing the PIN
1. Press the O button.
2. Use the G and H buttons to navigate to the BASE menu.
3. Press the
O
button.
4. Use the G and H buttons to navigate to the SYSTEM PIN option.
5. Press the O button.
6. Enter the current PIN.
7. Press the
O button.
8. Enter the new PIN.
9. Press the
O
button.
10.Enter the new PIN again to confirm it.
11.Press the
O button.
Note: The PIN is set at the factory to “0000”.
Registering a Handset
Up to 5 handsets, including those from other manufacturers, can be
operated from your base station. However, the handsets must comply with
the GAP standard. To register handsets from other manufacturers, please
proceed according to the instructions in their corresponding manual. It is
possible that not all the functions will be available with these handsets.
Note: GAP: G eneric A ccess P rofile = Standard for the interoperation of
handsets and base stations from different manufacturers.
1. Disconnect the power adapter plug from the power socket.
Wait 5 seconds.
2. Plug the power adapter plug back in the power socket.
Note: The base station is then in Registration mode for 60 seconds.
Continue with the handset.
3. Press the O button.
4. Use the
G
and
H
buttons to navigate to the REGISTER menu.
5. Press the O button.
6. Use the G and H buttons to select between BASE 1 − BASE 4 .
7. Press the O button.
8. Enter the 4 − digit PIN.
9. Press the O button.
Note: The PIN is set at the factory to “0000”.
Deregistering a Handset
Note: The handset with which the deregistration process is performed
cannot be deregistered itself. You can only deregister other handsets
registered on the same base station. This ensures that a minimum of one
handset is registered on the base station.
1. Press the
O
button.
2. Use the G and H buttons to navigate to the DE − REGISTER menu.
3. Press the O button.
4. Enter the 4 − digit PIN.
5. Press the O button.
6. Use the digit keys to enter the number of the handset (e.g. 2 ).
7. Press the
O
button.
Note: The PIN is set at the factory to “0000”.