33
SENSORS IN DETAIL
Registering the Remote Control on the
Base Unit
Register the remote control on the base unit.
1
Press the
Register sensor function key
on the base unit of the alarm system.
You will hear the voice message
For connec-
tion, trigger the sensor.
2
Press any button on the remote control.
You will hear the voice message
RC success-
fully connected. The remote control is regis-
tered on the base unit and can now be used,
further information is provided in sections
Using Defense Lines with the Remote
Control on Page 33
and
Panic Alarm on
Page 33
.
Using Defense Lines with the Remote Con-
trol
When you have connected the remote con-
trol to the base unit, you can use the remote
control to switch the defense lines on the
alarm system on and off or trigger a panic
alarm.
Panic Alarm
You can trigger a panic alarm when you find
yourself in an emergency situation or other
difficulties.
1
Press the Panic function key to trigger the
panic alarm.
2
Press the Disarm function key to switch
off the panic alarm.
The remote control must be within
communication range of the base unit
to trigger a panic alarm and switch the
defense lines on and off.
Caution! Risk of hearing damage
through loud alarm signal! Due to legal
requirements, the alarm signal contin-
ues for maximally 120 seconds. The
alarm signal switches off automatically
after about 120 seconds if the user
does not interrupt it. Use ear protec-
tors when testing the device. Do not
remain in the vicinity of the acoustic
alarm for a longer period when it has
been triggered.