background image

 

Important safety rules 

Please read the instructions thoroughly before using the device to make sure that you 
are able to use all of its functions.  

 

Keep children and pets away from the device. The device may only be used by adults. 

 

The device can only be used by one person at a time. Do not conduct any other activi-
ties on the device (e.g. cleaning) when it is in use. 

 

Have any necessary repairs performed by qualified specialist personnel. 

 

Protect the device against direct sunshine, extreme heat and moisture. 

 

The following warning sign is attached to the bottom of the device. 

 

Achtung

Gefahr eines elektrischen Schlages!
Gerät nicht öffnen!
Keinerlei vom Benutzer austauschbare Teile inseitig.
Gerät nur von geschultem Fachpersonal öffnen lassen.

 

 

Failure to observe this warning sign can lead to injuries. 

 

 

Safety symbols 

 

Do not reach into the infeed slot. 

 

Do not insert paper clips or 
staples into the infeed slot. 

 

Keep ties, scarves, loose cloth-
ing and long necklaces or 
bracelets out of the area around 
the infeed slot. 

Keep long hair out of the area 
around the infeed slot. 

 

Caution: failure to observe these safety symbols can lead to serious injuries.

 

If an object (sleeve, tie, etc.) is inadvertently fed into the infeed slot, pull out the 

mains plug immediately. 

 

Electrical safety guidelines 

Pull out the mains plug before emptying the paper collecting basket, cleaning the 
device or if the device is not going to be used for a long time. 

If the mains cable, mains plug or the device itself is damaged do not operate the 
device any longer (danger of injuries). 

Do not overload the recommended capacity of the mains socket. 

Do not make any alterations to the mains cable as it has been designed for the spe-
cified mains voltage. 

 

Operating elements 

The sliding switch (OFF / ON/AUTO / REVERSE) on the device has the following 
functions. 
OFF position: the device is switched off. 
ON/AUTO position: the device is ready for operation.

 

REV position: the cutting unit runs in reverse. To hold the rest of the paper back, you 
can push the sliding switch in the REV position. The cutting unit runs backwards and 
pushes the paper back.

 

The device also has a microswitch: 
shredding starts as soon as paper in inserted in the infeed slot. 

 

Materials suitable for destruction 

Only use the PS-35CC paper shredder to shred paper. The paper must be dry and 
must correspond to the specifications listed in the technical data. Shredding other 
materials can lead to injuries (for example, if solid material splinters) or damage to the 
device (destruction of the cutting unit, etc.).

 

Do not shred endless paper documents with this device. Remove all paper clips and 
staples before feeding paper into the device.

 

 

Starting up 

Take the device carefully out of the packaging and place it on the paper collection 
basket. The bulge in the paper collection basket must point to the front. The device 
can only be operated when it has been put properly in place (contact switch). 

Plug the mains cable into the socket. Please observe the energy supply specificati-
ons on the back of the device in your safety measures. 

The socket and the mains connection of the device must be freely accessible for 
safety reasons so that the power supply can be disconnected in emergencies. 

 

Paper supply 

Switch the device on with the sliding switch (ON/AUTO position). 

Feed the paper to the cutting unit through the infeed slot. 

The device runs forwards and draws the paper in. 

The device switches off automatically after the shredding cycle. The motor carries on 
running for another 2-3 seconds to remove the remaining paper from the cutting unit. 

Caution:

 

the sheet capacity given in the technical data may not be exceeded as oth-

erwise a paper jam will occur. Remember that the thickness of the paper increases 
when it is folded and the recommended sheet capacity may be exceeded in this way. 
Reduce the quantity of paper fed if it is coarse fibre paper.

 

it is recommended not to fill the paper collection basket up to the cutting unit. This 
prevents cut material becoming jammed in the cutting unit.

 

Empty the paper collection basket at regular intervals. 
 
 
 
 
 
 

Caution 

Danger of electric shocks! 
Do not open the device. 
Device contains no user-serviceable parts. 
Device should only be opened by trained  
specialist personnel.

 

Reviews: