Olympia Protect 9730, Operating Manual

Page: 28 / 42

28
P
ROTECT
SETTING UP THE BASE UNIT
Setting the Arming Delay
You can set the alarm system to be armed following a
GHȴQHGGHOD\
7KLVSURYLGHV\RXZLWKVXɝFLHQWWLPHWROHDYH\RXUDSDUW -
ment or house through the alarm-protected front door
before the alarm system is actually armed.
You can set an arming delay between 0 and 240 seconds.
During the delay period, you will hear a signal tone issued
at intervals of one second.
1
Select the Alarm Setup menu option.
2
&RQȴUPE\SUHVVLQJ .
3
Select the Arming Delay menu option.
4
&RQȴUPE\SUHVVLQJ .
5
Set the delay time.
6
&RQȴUPE\SUHVVLQJ .
Setting the Alarm Period
The base unit is equipped with its own siren.
The duration of the warning signal can be selected
between a minimum of 1 minute to a maximum of 10
minutes.
7KHVWDQGDUGVHWWLQJIRUWKHDODUPSHULRGLVbPLQXWH
Observe any locally applicable regulations regard-
ing limitation of alarm times from burglar alarms.
1
Select the Alarm Setup menu option.
2
&RQȴUPE\SUHVVLQJ .
3
Select the Alarm Period menu option.
4
&RQȴUPE\SUHVVLQJ .
5
Set the alarm period.
6
&RQȴUPE\SUHVVLQJ .
Switching the Warning Signal from the Base
8QLW2Q2΍
This function enables the warning signal from the base
XQLWWREHVZLWFKHGRQDQGR΍
This setting is useful, for example, if you have
installed an additional outdoor siren. If an alarm is
triggered, the outdoor siren issues a loud warning
signal and alerts others to the situation. The base
XQLWUHPDLQVVLOHQWPDNLQJLWPRUHGLɝFXOWIRUWKH
LQWUXGHUWRȴQGWKHEDVHXQLW