The battery icon disappears and the red lamp on the desktop charging
station goes out when the walkie-talkie is fully charged.
E. Disposing of the batteries
Batteries must be disposed of at shops which sell batteries or at collection points
which provide the corresponding containers.
Easy Start Guide
A. Power on / off
1. Press and hold the button for 2 seconds to switch the walkie-talkie on.
2. You will also hear an acoustic confirmation signal indicating the power
cable is connected correctly.
3. Press and hold when in Standby mode for a further 2 seconds to
switch the walkie-talkie off. You will also hear an acoustic confirmation
signal.
B. Key lock on / off
1. Press and hold the
MENU
button for 2 seconds.
2. Only
the
PTT, CALL
,
Vol +
&
Vol –
buttons are enabled for use when the
key lock is active.
3. Press and hold the
MENU
button again for 2 seconds to enable the all the
buttons.
C. Channel
selection
1. Press
the
MENU
button to select the Channel Selection menu.
2. Press the button to confirm the input. The channel number lights up.
3. Press
the
+ / -
buttons to change the channel.
4. Press the button to confirm your selection and return to the main
screen display.
D. Subcode
selection
1. Press
the
MENU
button.
2. Press
the
+
/
-
buttons until
SCod
appears in the display.
Press the button, subcode numbers light up.
3. Press
the
+
/
-
buttons to change the subcode, 00 to 38 are possible.
4. Press the button to confirm your selection and return to the main
screen display.
(Walkie-talkie is off.)
(Walkie-talkie is on.)
Red lamp
Red lamp
