15
All the walkie-talkies which are within range and are
switched to the same channel receive your message.
appears in the display.
3
If you want to answer a signal received, press the
PTT
key and speak into the microphone.
Scanning the Channels
Before scanning all the channels to receive possible
radio signals within range of your walkie-talkie, en-
sure that the setting in the Subchannel menu is
0F
.
1
Press the
key. The walkie-talkie scans all
the channels in succession.
2
If you want to retain a channel, press the
key again.
If you want the communicate with others, ensure that
all the relevant walkie-talkies communicating with
each other are using the same subchannel.
Setting the Channel
The walkie-talkies use free channels. The walkie-talk-
ies within range which are set to the same channel
can receive signals. If you do not want to, please
observe the information regarding subchannels,
inferring that third parties can participate in your
communication.
1
Press the
key.
appears in the display.
2
Use the
and
keys to set the re-
quired channel.
3
Confirm your input by pressing the
PTT
key.
Setting the Subchannel (Subcode)
CTCSS Code
In order to enable communication via a subchannel
(CTCSS code), the walkie-talkies communicating
with each other must be set to the same channel and
same subchannel.
1
Press the
key twice.
appears in the
display.
2
Use the
and
keys to select the
required subchannel.
Select the setting
0F
if you do not wish to use a
subchannel.
DCS Code
In order to enable communication via a subchannel
(DCS code), the walkie-talkies communicating with
each other must be set to the same channel and
same subchannel.
1
Press the
key three times
.
appears in
the display.
2
Use the
and
keys to select the
required subchannel.
Select the setting
0F
if you do not wish to use a
subchannel.
Dual Watch
You can use the Dual Watch function when you want
to monitor two channels simultaneously.
1
Press the
key four times.
DW
appears in
the display.
2
Select the second channel required (in addition
to the current one) using the
and
keys.
3
Confirm your input by pressing the
PTT
key.
4
If the function is switched on,
DW
appears in the
display continuously. The display shows the
selected channels alternately.
VOX Function
You can use the VOX function when the microphone
Summary of Contents for PMR 1410
