Olympia Omega 2140, User Manual

Page: 29 / 277

1-12
1.4 Connecting to a local area network (LAN)
This machine can transmit with the TCP/IP protocol on a LAN. Therefore, this ma-
chine must be connected to the LAN with a network cable.
Connecting the network cable
Insert one plug on the network cable into the network port (LAN) on the left side of
the machine, and then insert the other plug into an available port on the network hub.
2
Reminder
The network cable is not included with this machine; therefore, use Category 5
or 5e cable for the network cable.
Network port LEDs
LED1 (LINK): This indicator lights up when the network cable is correctly connect-
ed. If this indicator does not light up, even if it is assumed that the cable is correctly
connected, check the connection again. If this indicator still does not light up, even
though both ends are correctly connected, the network cable may damaged.
LED2 (ACT): This indicator flashes while data is being sent or received.
LED1
LED2