9
Appendix
9-2
9.2
Troubleshooting
Check the following chart if you have problems using the copier as a
network printer.
Checkpoint
Possible cause
Solution
1
Has the print job
reached the copier?
Yes
A copier error has
occurred. (No paper,
no toner, etc.)
Check the copier and
resolve any errors.
No
The data has not
arrived at the copier.
See checkpoint 2.
2
Does the computer
respond when a ping
test is sent to the
controller?
Yes
The port number
setting is wrong.
Correct the port
number setting.
A computer
malfunction has
occured.
Restart the computer.
The driver has not
been installed
correctly.
Uninstall the driver
software, and then
reinstall it according to
the instructions.
No
A copier malfunction
has occured.
Restart the copier.
The network cable has
become disconnected
or there is a problem
with the hub.
Reconnect the cable,
and restart or replace
the hub.
The IP address or
subnet mask setting is
wrong.
Correct the IP address
and subnet mask
setting.
Summary of Contents for Omega 1630f
