![background image](http://html1.mh-extra.com/html/olympia/ol6010/ol6010_owners-manual_732507024.webp)
24
Interference
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Re-orient or relocate the receiving antenna.
2. Increase the distance between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experience radio/TV technician for help.
Noise
Electrical pulse noise is present in most homes at one time or another. This
is most intense during electrical storms. Certain kinds of electrical equipment,
such as light dimmers, fluorescent bulbs, motors, fans, etc., also generate
pulse noise. Because radio frequencies are susceptible to this, you may on
occasion hear pulse noise through the speaker. This is usually only a minor
annoyance and should not be interpreted as a defect of the unit.